Enerdrive B-TEC 12V 200Ah G2 Lithium Battery

$2,538.00

The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.

The Enerdrive Enerdrive B-TEC  G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  •     Battery Capacity
  •     Battery Voltage
  •     Battery Current (Amps)
  •     Battery State of Charge (SOC)
  •     Battery State of Health (SOH)
  •     Battery Status
  •     Individual Cell Voltage
  •     Battery Temperature
  •     Battery Cycles
  •     Battery Alarms
  •     Battery Event Information

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery

Part Number: EPL-200BT-12V-G2 Categories: , , Tags: ,
Normal SpecificationEPL-100BT-12V-SLIMEPL-125BT-12V G2EPL-200BT-12V G2EPL-300BT-12V G2
Nominal Voltage12.8V
Nominal Capacity100Ah125Ah200Ah300Ah
Cycle Life (DOD – 80% under controlled conditions)≥ 2000 Cycles
Standard Charge Specification (Lithium profile charger required)
Battery Charge Temperature0 ̴ 45°C
Normal Charge Voltage CV/CC*14.20 ̴ 14.60V
Standby (Float) Voltage13.50 ̴ 13.80V
Maximum Charge Current80A @ 25˚C for 30mins60A @ 25°C for 30mins150A @ 25°C for 30mins190A @ 25°C for 30mins
Recommended Charge Current
For Maximum Life, Charge in the lower amperage range
20~50A20~60A40~100A80~120A
Standard Discharge Specification
Battery Discharge Temperature-20 ̴ 60°C
Battery Output Voltage Range11.00 ̴ 14.60V
Maximum Discharge/Pulse Current100A @ 25˚C ±5˚C for 30 mins100A @ 25˚C ±5˚C for 30 mins200A @ 25˚C ±5˚C for 30 mins250A @ 25˚C ±5˚C for 15 mins
Pulse Discharge Current250A for 1.0s450A for 1.0s
Discharge Cut-off Voltage≤11.20V
Circuit ProtectionThe battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
Over-Charge Protection
Over-charge Protection Per Cell3.90V ± 0.03V
Over-charge Release Per Cell3.60V ± 0.05V
Over-charge Release MethodDischarge below release voltage
Over-Discharge Protection
Over-discharge Protection Per Cell2.80V ± 0.05V
Over-discharge Release Per Cell3.20V ± 0.05V
Over-discharge Release MethodApply Charge/Voltage ≥12.8V
Battery Manual Reset ButtonNoYes
Over Current Protection
Discharge Over Current110A for 30s – 450A for 1s110A for 30s – 450A for 1s220A for 30s – 450A for 1s280A for 25s – 400A for 3.5s
Protection Reset TimeApprox 10s Auto Release
Over Current Release MethodDisconnect Load
Over Temperature Protection
Battery Discharge Over TemperatureProtection to 65°C ± 5°C
Release at 50°C ± 5°C
Battery Charge Over TemperatureProtection to 55°C ± 5°C
Release at 45°C ± 5°C
Short Circuit ProtectionAuto release after 5s
Dimensions
Length551mm318mm505mm521mm
Width110mm165mm172.5mm280mm
Height240mm232mm265mm238mm
WeightApprox 12.5 KgApprox 15.5 KgApprox 25.0 KgApprox 38.2 Kg
Storage Information
Temperature & Humidity Range≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH
≥ 90 days -10°C ̴ 45°C, 5 ̴ 75% RH
Self-discharge Rate≤ 3% Per Month